MotorScrubber Dry Floor Buffing Pads, White (10/Case)

MotorScrubber White Buffing Floor Pads for Dry and Mist Finishing on Hard Floors

After a strip-and-refinish cycle, the final buffing pass determines how the floor reads on arrival. MotorScrubber Dry Floor Buffing Pads in White run that pass on the M3 and JET3, operating dry for standard buffing or with a fine water mist to produce a wet-look finish on newly maintained hard floors. At 7.9", the pad reaches perimeter lines, corners, and confined sections that full-size polishing machines leave unfinished, and the soft white surface clears light marks without abrasion so the polish layer stays intact.

White Buffer Pads for High-Gloss Results on Both New and Refinished Hard Floors

The mist application sets the white pad apart from every other pad in the MotorScrubber lineup. A fine water mist shifts the buffing pass from standard gloss maintenance to a wet-look result on new or newly refinished floors, giving your team one pad that handles both finishing scenarios without switching equipment. Each pad runs double-sided, flipping when one surface loads up, and at 30,000 to 40,000 ft² per pad, a 10-pad case holds through full property finishing rotations before the next reorder.

Product Highlights:

• Final-Stage Finishing Pad: White pad runs after polish application to deliver a high-gloss result on newly maintained hard floors
• Dry and Mist Buffing Ready: Runs dry for standard buffing or with a fine water mist for a wet-look finish without a pad changeover
• Wet-Look Finish Option: Fine water mist produces a polished wet-look result on new and newly refinished hard floors
• Non-Abrasive Surface: Soft white material removes light surface marks and restores shine without cutting into the finish underneath
• Double-Sided Construction: Flip when one side loads up to extend pad life across 30,000 to 40,000 ft² per pad
• Compact 7.9" Reach: Fits perimeter lines, corners, and confined sections that full-size polishing machines leave unfinished
• Vertical Surface Approved: Handles wall and upright surface buffing on M3 and JET3 on the same machine pass
• M3 and JET3 Compatible: Designed for MotorScrubber M3 and JET3, running at up to 360 RPM
• 10-Pad Case Format: Supports recurring gloss finishing schedules across multi-zone and multi-property programs

For Use With:

• MotorScrubber M3 Floor Scrubber Starter Kit. Compact portable scrubber for final-stage buffing and gloss finishing in lobby areas, spa corridors, and confined floor sections.
• MotorScrubber JET3 Floor Scrubber Starter Kit. Portable scrubbing platform with on-demand spray for mist buffing passes and wet-look finishing on newly maintained hard floors at up to 360 RPM.

More MotorScrubber Pads for Hospitality Floors:

• MotorScrubber Floor Stripping Pads, Black (10/Case). Heavy-duty wet stripping for floor finish, sealers, and wax buildup along baseboards and perimeter areas.
• MotorScrubber Floor Scrubbing Pads, Green (10/Case). Heavy scrubbing and light stripping for grease buildup and heavily soiled hard floors.
• MotorScrubber General Floor Cleaning Pads, Blue (10/Case). Daily wet scrubbing for routine hard floor maintenance between strip cycles.
• MotorScrubber Floor Polishing Pads, Red (10/Case). Gloss restoration and light scrubbing on hard and wood floors.